POSSIBLE SOLUTION Cooler temperature is too warm
Kinked beer line
Wrong size beer line
Applied pressure too high
Applied pressure too low
Bad tap coupler washer
Faucet washers bad
Dirty system System designed improperly
REMEDY Adjust temperature to 34º to 38º
Have HAPPY TAP replace the bad line
Have HAPPY TAP replace the line
Adjust regulator to appropriate pressure
Adjust regulator to appropriate pressure
Replace coupler washer
Replace faucet washer Call HAPPY TAP to clean them Call HAPPY TAP to correctly balance the system
PROBLEM: No beer is coming out of faucet or it is dribbling.
POSSIBLE SOLUTION CO² tank is empty
Regulator valve is turned off
Manifold valve is turned off
Keg is empty
Check ball in coupler stuck
REMEDY Replace empty tank
Turn on at base of regulator (up & down)
Turn manifold valve on
Replace keg
Remove coupler from keg and free check ball
FORCED AIR SYSTEM (5-25 feet)
PROBLEM: Beer is pouring foamy at the tap.
POSSIBLE SOLUTION Blower fan is not working
Blower fan flow is obstructed Cooler temperature is too warm
Kinked beer line
Wrong size beer line Applied pressure too high
Applied pressure too low
Bad tap coupler washer Faucet washers bad
Dirty system
System designed improperly
REMEDY Plug in, fix or replace
Fix obstruction Adjust cooler temperature to 34º to 38º
Have HAPPY TAP replace the bad line
Have HAPPY TAP replace the line
Adjust regulator to appropriate pressure
Adjust regulator to appropriate pressure
Replace coupler washer
Replace faucet washer
Call HAPPY TAP to clean them
Call HAPPY TAP to correctly balance the system
PROBLEM: No beer is coming out of faucet or it is dribbling.
POSSIBLE SOLUTION CO² tank is empty
Regulator valve is turned off
Manifold valve is turned off
Keg is empty
Check ball in coupler stuck
REMEDY Replace empty tank
Turn on at base of regulator (up & down)
Turn manifold valve on
Replace keg
Remove coupler from keg and free check ball
GLYCOL/LONG DRAW SYTEM (25 feet and up)
PROBLEM: Beer is pouring foamy at the tap.
POSSIBLE SOLUTION Glycol bath too cold
Glycol bath too warm
Cooler temperature is too warm
Improper gas for system
Glycol pump not working
Glycol pump flow obstructed
Applied pressure too high
Applied pressure too low
Bad tap coupler washer
Faucet washers bad
Dirty system
System designed improperly
REMEDY Adjust glycol chiller to 28º to 32º
Adjust glycol chiller to 28º to 32º
Adjust cooler temperature to 34º to 38º
Change to mixed gas or a blender
Have HAPPY TAP replace pump
Have HAPPY TAP remove obstruction
Adjust regulator to appropriate pressure
Adjust regulator to appropriate pressure
Replace coupler washer
Replace faucet washer
Call HAPPY TAP to clean them
Call HAPPY TAP to correctly balance the system
PROBLEM: No beer is coming out of faucet or it is dribbling.
POSSIBLE SOLUTION CO² tank is empty
Regulator valve is turned off
Manifold valve is turned off
Keg is empty
Check ball in coupler stuck
Lines may be frozen
REMEDY Replace empty tank Turn on at base of regulator (up & down)
Turn manifold valve on
Replace keg
Remove coupler from keg and free check ball
Temporarily unplug glycol chilling unit
1326 North Meade Street
Appleton, WI 54911
(920) 733-4294
1-800-261-BEER ask@yourhappytap.com
